Pumps/Inflation

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.

Lightweight plugs for tubeless tire punctures. When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

The Airlift 200 is a single action bike pump that is compact enough to keep on hand anytime and anywhere. It has a large chamber to fill tires fast and a pump handle that locks in place for extra security. - Smart head fits on both Presta and Schrader valves - Compact, 5-inch hose extends for easier operation - Pump handle locks into place - Includes a frame mount and two 4mm bolts - Pumps up to 80 psi maximum pressure

A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.

The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.

The Airlift 210 is a single action road bike pump that is small enough to take on the next race. It has a lightweight alloy body with a sleek design that won't slow riders down. - Smart head fits on both Presta and Schrader valves - Compact, 5-inch hose extends for easier operation - Rubber seal holds pump handle in place - Includes a frame mount and two 4mm bolts - Pumps up to 160 psi maximum pressure

Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges. - CNC machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges - Comes with one 16g cartridge

One tubeless bicycle tire tool to rule them all. Compact and versatile, this is the ultimate tubeless tire repair tool. Never get stuck on the side of the trail again! Self-contained tire repair kit includes: - 5 tubeless repair plugs - 2 Presta core valves - Integrated valve core removal tool - Small, strong plugger tool - Alloy weatherproof storage capsule

Tubeless tire plug kit plus CO2 head. - Tire plug tool - Tire plugs - CO2 head - Storage case - Mounting bracket - 5 year warranty

The Airlift 220 is a single action mountain bike pump that is small enough to bring along on the trail. It features full-body alloy construction with a cross-hatch texturing for better grip in slippery situations. - Smart head fits on both Presta and Schrader valves - Compact, 5-inch hose extends for easier operation - Rubber seal holds pump handle in place - Includes a frame mount and two 4mm bolts - Pumps up to 80 psi maximum pressure

Genuine Innovations' AirChuck Elite offers Push-To-Inflate technology for fast, easy & controllable single-handed CO2 bicycle tire inflation! • Cartridge compatibility: 12, 16, 20, 25 gram threaded CO2 cartridges & Big Air! (not 45-gram cartridges) (each sold separately) • All metal aluminum design • Easy to use and fully controllable • Push-to-Inflate technology • Works with both Presta and Schrader valves • Includes one 16 gram and one 20 gram threaded CO2 cartridge • Weight: 16 grams

Keeping your bike's tires properly inflated is the best way to ensure a happy ride. Maintain pressure and avoid pinch flats with MSW AirLift Floor Pumps. - Dual head works on both Presta and Schrader valves - Steel Barrel with durable composite base - Max pressure: 150 psi - 32-inch long hose - 2.5-inch diameter gauge - On-board inflation adapter kit for toys, balls & rafts - Overall height: 25-inches

Portland Design Works' Ninja Pump puts the ancient arts of stealth and power in the palm of your hand. It is master of two fighting styles: Pump and CO2 inflator. It knows the way of the Schrader and Presta, and threads on to both for secure inflation. Like any highly-trained warrior, it excels under pressure, and can overcome even the most formidable 120psi tire. - Alloy construction  - Control knob easily regulates CO2 flow - Composite pump mount fits under bottle cage - Weight: 74 g (2.6 oz) - Length: 147 mm (5.75") - Lifetime PDWarranty

Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere.

The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit has a water bottle cage as well as everything needed for common road-side fixes: an eight-piece multi-tool, three tire levers, CO2 inflator & cartridges. - Lightweight composite water-bottle cage - Three MSW tire levers - Eight-piece flat pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges

Keeping your bike's tires properly inflated is the best way to ensure a happy ride. Maintain pressure and avoid pinch flats with MSW AirLift Floor Pumps. - Smart head fits on both Presta and Schrader valves - Steel barrel and steel base - Bleed valve for fine-tuning pressure - Max pressure: 150 psi - Extra-long 48-inch hose - 2.5-inch diameter gauge - Hidden inflation adapter kit for toys, balls & rafts - Overall height: 25-inches

Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere. And it handles an astounding 600 psi max.

The PFP-10 is a reliable floor pump that's equally at home in the garage, workshop or trailhead, with a long hose, extra-large foot pads and a giant easy-to-read gauge. The locking universal head automatically adjusts to fit both Presta and Schrader valve stems. - Compatible with Presta and Schrader valves - Maximum pressure: 160 PSI (11 bar) - One-year warranty — see Park Tool Limited Warranty

Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.

- Pocket size - CNC machined aluminum - Compact highly efficient overlapping handle - Presta and Schrader valve compatible ABS Flex Hose - Includes integrated valve core tool - Aluminum mounting bracket - 140mm/160psi - 160 PSI / 11 BAR - Length 140mm - Weight 98g - Loaded includes twin speed drive CO2 head, 20g CO2 cartridge and lever kit

Innovative 2-in-1 cycling CO2 dispenser and tubeless tire repair kit simultaneously inflates and seals tubeless tires. Machined aluminum construction is both lightweight and highly durable. Hardened steel reamer scours hole, inserts plug, and inflates tire for an efficient and rapid repair. CNC-machined twist knob manually controls release of CO2 gas. Aluminum canister holds the five included tire plugs and safely stores the reamer when not in use. High-quality tire plugs aggressively seal holes that are too large to be sealed by sealant alone (hole size varies from tire to tire). Sleek, compact design fits in a pocket or straps to your bike with a simple Velcro strap. Note: Sealing performance may vary based on puncture size, tire size, and tire pressure. - Compact tubeless tire repair kit. - Machined aluminum storage tube doubles as a handle. - Combined tire reamer and insertion tool. - Includes five tire plugs. - CO2 cartridges sold separately.

Carry the essential roadside/trailside tools with the MSW Tool Hugger Kit. The Kit includes all the basics for quick repairs: CO2 cartridges, inflator head, tire levers, mini tool, and patch kit. Bring along your own tube and roll them all up in the Tool Hugger Wrap, which attaches to standard saddle rails, or just toss it into a jersey pocket. - Durable Cordura outer layer - Seven elastic tool compartments - Hook and loop closures

High-volume pump holds securely to bike frames and includes stable folding foot for on-the-go inflation ease. The pump with something to prove The Bontrager Mini Charger is a high-volume, frame-mountable bicycle tire pump that includes a long hose for ease and versatility. A practical folding foot stabilizes while you pump, for faster tire inflation. Product details - High-volume frame mount pump - Stable, folding foot for pumping ease - Long hose gives versatility and saves your valve stems

Grip and rip with Lezyne's Shock Drive portable shock pump. With a full CNC-machined aluminum body, tough composite gauge, and palm-sized ergonomic handle, you can pump reps with Schwarzenegger pep till your shock's content. The zero-loss chuck ensures accurate ride pressures up to 400 psi, and its light weight and durability make it great for trail or shop use.

The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit provides everything needed to fix a punctured tire. The kit includes an eight-piece multi-tool, glueless tire patch kit, three tire levers, CO2 inflator & cartridges, and a seat bag to put it all in - 50 cubic inch seat bag with hook-and-loop mounting straps - Three MSW tire levers - Eight-piece flat-pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Glueless patch kit with six patches, sandpaper, instructions - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges

The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included

Airworx 10.0 Anthracite Floor Pump from SKS provides a large volume of air per stroke. The soft-touch handle with grip recesses provides a comfortable feel. The precision gauge can be easily seen, positioned at the top of the pump body. In addition to the long hose, the pump is fitted with a Multi Valve head for use with all valve types. - Inflates to 10 bar/144 psi - Compatible with Presta, Schrader, and Dunlop Valves - Replacement/rebuild parts are available - Solid metal base for a firm foothold - Measurements: 665mm height - Made in Germany

The Wolf Tooth EnCase Pump offers easy access, quick use, and reliable performance for mountain, gravel, and fat bike tires. It requires less force per stroke than competitors, making it efficient for high-volume tires. The EnviroLock sealing protects internal components from water and debris. The pump is easily accessible when mounted on a frame, ensuring it remains clean and ready to use. Part of the EnCase System, The pump can store an EnCase System tools. - PSI: 70 - Weight: 153 - Valve Compatibility: Presta - Includes Mount Bracket: Yes