Parts & Accessories
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered. - 4 degrees of float both inward and outward
The ATAC cleats are developed for the TIME mountain bike pedal range (MX and XC range). By switching right and left cleats, you can choose two options for the release angle: 13-degrees or 17-degrees. - Weight: 45g/pair
Replacement pin set for Race Face Atlas and Aeffect pedals.
RaceFace Chester Pedal Pin Kit 20 Pins Black
RaceFace Chester Pedal Spindle Kit Left/Right
Everything you need to fully rebuild your OneUp Aluminum Pedals. Our V2 kit is compatible with all OneUp Aluminum pedals. The brass bushings take the place of the 3 small cartridge bearings and aluminum washer that were on our original pedal assembly. KIT CONTAINS - 2 LARGE OUTER BEARINGS - 2 BRASS BUSHINGS - 2 OUTER SEALS - 2 FLANGE WASHERS - LH AND RH AXLE BOLTS - 2 AXLE O-RINGS - LH AND RH BEARING NUTS
Everything you need to fully rebuild your OneUp Composite Pedals. KIT CONTAINS - 2 CARTRIDGE OUTER BEARINGS - 2 INNER DU BEARINGS - 2 OUTER SEALS - 2 AXLE NUTS
Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: -Enduro catridge bearings - Igus LL-glide bearings - Double seal system (internal and external seals) - Hex alloy end caps - O-rings - Nuts - Sleeve bushings - Bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees
Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability. - Weight (pair): 30 grams - Shoe compatibility: SPD - Release angle: 15 degrees
Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals. - Chromoly spindles - Sealed cartridge bearing and bushing in an alloy cartridge - Compatible only with iSSi Road pedals - Installs with iSSi Road spindle tool (TL5499) - Pedal Spindle: 9/16" - Spindle Material: Chromoly Steel
$50.00 - $52.00
Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. Includes: - iSSi chromoly spindles - Sealed cartridge outer bearings - Inner Bushings - Spindle nuts - Seals - iSSi-branded end caps
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.
Xpedo XPR cleat set for R-FORCE 6 is an SPD style cleat specifically designed for 3-hole road shoes. - Weight: 135g per set with hardware - Float: 6°
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float). - Fits VP and Look Keo pedals (pedals sold separately)
- Works with all XPRO and XPRESSO pedals. - Not included with new XPRO and XPRESSO pedals. - This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle. - Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
- Compatible with all Spike & Oozy Pedals - Full Complement Sealed Bearing x 2pcs - Green Silicone Friction Seals - Replacement inboard bearings for your SPIKE or OOZY pedals.
Shorter 7mm rear load pins for the outer extremities of SPOON, SPIKE, and OOZY pedals. - Provide durability and improved safety - Mix and match with the longer stock pins to customize your ideal amount of grip
Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness. - 28pcs rear load pins - 16pcs front load pins - Tool included
The Spoon Pedal Axle Rebuild kit includes the internal parts required to completely rebuild a set of Spoon pedals. - Pins available separately
Traditionally, mountain cleats have only had two material options. Mild steel and brass. This has largely been to ensure that the cleat wore out faster than the pedal interface, but has left us with cleats that are often times very fast wearing, and in all cases, are quite heavy. Enter 6/4 Titanium, only slightly less hard than tool or spring steel used in the pedals, it's a remarkable 2.25 times stronger and 3 times tougher than brass or mild steel. Best of all, the extreme toughness and abrasion resistance of 6Al/4V titanium means that you can expect 300-400% wear life compared to traditional materials. Now we couldn't just stop there, but by combining 3D printing technology with this material that is 1/3 lighter than steel, we are able to achieve a cleat with internal lattice structure (called a gyroid) which maintains stiffness and strength while reducing weight to create a cleat set that is HALF the weight of a standard cleat set. This savings of 25-30 grams per set of cleats is significant over time, particularly in CX events where running is crucial. 25gm reduction x 100 rpm = 180kg of mass not lifted per hour of riding, 90kg per leg!
Rebuild kit for Race Face Aeffect pedals.
Replacement axles for Race Face Atlas pedals.
Bearing rebuild kit for Race Face Atlas pedals.
RaceFace Chester Pedal Rebuild Kit
- Tubular stainless steel cage clips for single toe strap
- NJS/Keirin certified chrome plated steel clips for single toe strap - Hardware included
The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats. - Use: Road & Indoor Bike - Material: Polyacetal + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 75g
Page 1 of 3 Next page