Parts & Accessories
$10.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
$5.99 - $28.00
The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires
The FlatBoy patch kit will be your best friend when road-/trail-side flat repairs are needed. It features a set of six self-adhesive patches, sandpaper to lightly roughen before applying, and instructions in a snap-shut kit. Patches conform to inner tube perfectly and the kit is compact so you can always find a spot to carry one. Don't leave home without it. - Easy to apply to your inner tube so your ride can continue on unhindered. - Glueless patches with no mess. - Six patches are housed in a small, lightweight container that fits in the smallest places.
$7.99 - $20.89
Endurance formula lasts twice as long as standard Orange Seal. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/8-inch, and slices up to 1/2-inch with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients
- 6061 Aluminum valve and cap - Removable valve core - Comes with round & square rubber bases for different rim types - Spare alloy valve cap with integrated valve core removal tool - Installs securely with a 4mm fitting for a hex wrench on the valve and a 10mm wrench flat on the nut
$29.99 - $34.99
- The same tubeless valves, now with a Tire Insert air flow system - 6 slots machined into the base of the valve stem allow air to flow freely around tubeless tire inserts - Upgraded to aircraft grade 7075 aluminum valve stem and cap - 4mm machined Allen Key slot for easy installation/removal - Valve core removal tool integrated into valve cap - Includes multiple rubber bases to optimize fit with multiple rim types
- Inflates a tire and stops leaks in 90 seconds or less - Presta compatible - For use with tubed or tubeless tires - ORM-D: Pressurized liquid restricted from shipping by air
CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm Includes: - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions
CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm Includes - 1 CushCore Insert - 1 CushCore Tubeless Air Valve - Installation Instructions
45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip. - Concave tip for durability and longevity - Aluminum base to save weight - Compatible with the 45NRTH stud insertion tool
Tubeless Valve/Tape Kit - Includes Tape, 2 Universal Valves & 1 Valve Core Wrench
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened
Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal
$4.00 - $16.00
Whisky Parts Co. Tubeless Rim Tape.
$8.00 - $40.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.
A good pair of valves can make a big difference in the reliability and ease-of-use for any tubeless setup. Whisky's No. 7 Brass tubeless valves help ensure your tires are dialed for every ride. And, it's always a good call to keep an extra valve in a pocket or bag. - For use with Whisky tubeless rims and most others - 40mm length - Fits up to a 8mm valve hole - Removable valve core - Sold as a pair
$19.00 - $23.00
No.9 Tubeless valves for use with Whisky Tubeless rims and most other systems. These alloy stems feature removable Presta cores and are designed to fit up to 8mm valve holes. - Available in a number of lengths and colors to perfectly fit your rims and your sense of style. - Includes two valves
- Shim adds support to Presta stem used in a Schrader rim
Air-Liner GRAVEL is an insert for tubeless-ready gravel tires. Re-usable and very easy to install—as easy as mounting an inner tube on your tire—Air-Liner GRAVEL is compatible with tubeless-ready tires only and with 3-way valves (5-way valves are included for ultimate airflow). The insert can be used with sealant—preferably sealants without ammonia. - Air-Liner increases control, durability, performance, and protection of both tire and wheel. - Compatible with any wheel size up to 700c with 3-way tubeless valve, and tire widths from 31mm to 40mm. - The Vittoria Air-Liner is a tire insert, designed for use in tubeless tires. - Sold individually (single tire).
$7.35 - $21.75
Vittoria introduces Universal Sealant, the new range of anti-puncture bike tire sealants designed for Road and MTB use. The formula of the sealant has been improved. Universal Sealant does not contain ammonia, repairs larger punctures (up to 7mm), acts faster, and is compatible with both Road and MTB tubeless tires and with any type of inner tube. It is easy to use thanks to its specific pour spout that allows the application of the sealant straight from the valve. Universal Sealant is the universal anti-puncture bike tire sealant.
- High performance, professional tubular glue that dries rapidly - Each tube is usually adequate for gluing two tubular tires - Law prohibits ORM-D materials from shipping by air
- Ingenious snap-In plugs do the work of rim tape at 1/3 The weight - Makes tire installation easier and nipple repairs faster than with tape - Red plugs fit rims with 8mm holes - Yellow plugs fit rims with 8.5-9.3Mm holes
$36.99 - $59.99
Virtually Eliminates Flats Tannus Armour wraps around your tube. With up to 15mm of protection, sharp objects can't penetrate your inner tube. Never Stop Riding In the unlikely event you do get a flat tire, you can still ride for a limited period of time. More Than Flat Protection Tannus Armour's design also helps protect your rim on those big drops and hard hits. Better Handling Ride The Tannus Armour sidewalls help stabilize your tires on corners and cushion the ride for more comfort. - Easy installation - Reduce punctures risk - Protects your rims from impact and sharp object penetration - Sidewall protection - Ideal For E-bike and MTB
Armour Tubeless displaces the small impacts but also offers a spring-like rebound for a smooth yet playful ride. Flexible Wings Not just a big chunk of foam. Armour Tubeless wings flex with the tire and rim to provide more traction, stability, and protection. Easy to install Trail ready in 5-10 minutes. No compressor or complicated tools needed. Simple, frustration-free install! Shock Absorption With 20mm of rim protection, Armour Tubeless provides almost double the shock absorption from impacts. - Proven to be the insert of choice by Professional Racers, Red Bull Rampage Athletes, Dirt Jumpers, Enduro Racers, Weekend Warriors, and the like - Super easy installation process - Sidewall Stabilizing wings - Compatible with any standard Tubeless set up valves - Lightweight: only 150 grams
A properly set up tubeless fatbike tire is like the holy grail of suppleness and, until now, we've forced you all to piecemeal together a tubeless kit for your Other Brother Darryl rims (Sorry about that. It won’t happen again, we promise… probably). But now you don’t have to do that anymore because our Tubeless Kit has everything you need to ditch your fat tubes. It comes with two of our nylon rim strips, a roll of Whisky Parts Co. tubeless tape, two tubeless valves, and two Problem Solvers Super P-Nuts. Just add your favorite sealant and let ‘er rip.
The Next Level in Sealing Power from the People who Invented Tubeless Conversions If you've walked the mechanics' pits at any National or International level event, chances are you've seen them: trademark Stan's black quart bottles with no labels. Look closer and you might have seen strange symbols scrawled all over the bottles in a silver marker, letters and numbers, formula notes by the man himself, Stan Koziatek. For nearly fifteen years Stan has been quietly formulating a special racing version of our legendary sealant for many of cycling's most successful teams. Working with athletes who push themselves and their tubeless systems to the absolute limit, he developed a proprietary sealant formula with close to twice the amount of the standard sealing crystals plus special "XL" crystals capable of sealing even larger punctures. Stan's Race Sealant's combination of large and smaller sealing crystals interlock to form a lattice work that not only seals but strengthens and reinforces the area of the puncture, allowing for an entirely new level of sealing performance. The quantity and size of crystals in this special formula means that Stan's Race Sealant can only be installed directly into the tire. As a result of its immense sealing capabilities, the Race Sealant will clog injectors and smaller bottles almost immediately. Stan's has made Race Sealant available to riders everywhere, and it is only available by the quart. - First choice of riders around the world for tubeless conversion and flat prevention - Twice the amount of Stan's standard sealing crystals - "XL" crystals capable of sealing even larger punctures - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment
Specialized's 2Bliss Ready Rim Strips create a secure barrier, from sealant to rim, in a clean, simple to install strip. Mountain bike riders running 2Bliss can now change tires quicker and easier than with any other tubeless system. Diameter / Width - 26" — 23mm-559 PV - 26" — 25mm-559 PV - 650b — 31mm-584 PV - 650b — 39mm-584 PV - 29" — 23mm-622 PV - 29" — 25mm-622 PV - 29" — 31mm-622 PV
$10.00 - $26.00
Our new 2Bliss Ready Tire Sealant was custom-designed in partnership with a leading laboratory for tire sealants, and it also underwent extensive real-world testing with our Factory Athletes. What we developed is an innovative, ecological formulation that's the answer to the requirements that riders like you've been demanding. It will immediately seal punctures up to 6mm, whether it be on a road or mountain tire, as well as across global temperatures [-20° to 70°C]. Natural, micro holes in the sidewalls will seal well, and the system is safe for use with latex inner tubes, even inside tubulars. Please note that this sealant is ammonium-, protein-, and latex-free, so it holds no potential for allergic reactions, and there's no risk of it creating damage to bike parts. - Proven by our Factory Team Athletes. - Seals punctures up to 6mm. - Performs in a wide temperature range (-20° – 70°C). - Works in latex inner tubes inside tubulars. - Ammonium-, protein-, and latex-free, so there's no risk of allergic reactions or damage to bike parts. Recommended sealant amount per tire: - Road: 24-32mm - 30-40ml - Open Road: 33-50mm - 50-70ml - MTN: 2.0-2.3” 80-100ml - MTN: 2.4-3.0” 100-125ml
Specialized's Airlock Sealant is the in-tube solution for flat prevention, surpassing the competition in flat protection performance. It's featured here in a personal, 8oz container that's ideal for two standard wheels. - Non-toxic, non-separating formula doesn't have a limited shelf life like the competition. - Coats the tube for permanent protection. - Works with any bicycle tube with a removable valve core. - Works continuously to prevent slow leaks. - Completely homogenous, so it doesn't puddle. - 8oz bottle fills two inner tubes. - 8oz bottle includes valve puller and hose under cap.
Our new RapidAir Tire Sealant was custom-designed in tandem with our new RapidAir tires and Roval wheels to be the fastest tire setup out there. Through development, we learned that high-pressure, 24-30mm tires require a totally different formula to seal punctures. Our new exclusive mixture not only immediately seals punctures up to 3mm across a large range of temperatures, but unlike other sealants, RapidAir sealant will also keep its seal when you reinflate back to normal riding pressure. - Compatible with CO2. - Creates the strongest plug after sealing. - No damage to bike parts. - Performs in a wide temperature range (-20° - 70°C). - Recommended sealant amount per tire: Tire size 24-26mm - 40ml, 28-30mm - 50ml - - - For Maximum performance, use 60ml for any 24-30mm - Seals instantly with minimal pressure lost.
Page 1 of 3 Next page