Filter By:
- Parts & Accessories (315)
- Wheels (276)
- Hubs (80)
- Rims (101)
- Spokes (18)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Wheels

$39.95
The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing.
- Designed and manufactured in Minneapolis, MN USA
- 7075 T6 Aluminum
- Similar to Fox Kabolt axle

$44.95
The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing.
- Designed and manufactured in Minneapolis, MN USA
- 7075 T6 Aluminum

$550.00
For 27.5-inch fatbikers looking to upgrade to carbon, the lightweight No.9 76w rim offers all the simplicity of a tubeless setup. Ready to roll over obstacles and give riders a longer contact patch, it’s optimized for use with tires measuring 4–5-inches. We’ve narrowed the spoke bed to reduce weight, and we’ve utilized a large, reinforced rim wall edge to withstand impacts related to running low pressures. Thanks to our convex rim profile designed to roll right through sand and snow, paired with our double-wall construction, all-season riding is within reach.

$324.95
Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down.
- 30mm inner rim width with 32 spokes laced in a 3-cross pattern
- 6069 aluminum alloy rim is TCS 2.0 tubeless-ready
- Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze.
- Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke.
- 6-bolt rotor mounts
- Top-tier EZO sealed bearings

$389.95
Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down.
- 30mm inner rim width with 32 spokes laced in a 3-cross pattern
- 6069 aluminum alloy rim is TCS 2.0 tubeless-ready
- Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze.
- Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke.
- 6-bolt rotor mounts
- Top-tier EZO sealed bearings

$324.95
Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down.
- 30mm inner rim width with 32 spokes laced in a 3-cross pattern
- 6069 aluminum alloy rim is TCS 2.0 tubeless-ready
- Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze.
- Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke.
- 6-bolt rotor mounts
- Top-tier EZO sealed bearings

$389.95
Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down.
- 30mm inner rim width with 32 spokes laced in a 3-cross pattern
- 6069 aluminum alloy rim is TCS 2.0 tubeless-ready
- Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze.
- Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke.
- 6-bolt rotor mounts
- Top-tier EZO sealed bearings

$5.00
Surly Rim Strips have one job and they do it well. They cover the cutouts in your rim and — if you're running a tube — they protect it from spoke heads and other sharp matter (okay, so maybe they have TWO jobs but they do them both really well.) Rim strips are crucial and should be used with all Surly rims. Ours come in an array of colors so you can really "express yourself."
Surly Rim strips are available in two different materials: PVC and Nylon. PVC is great if you plan on only running tubes. However, if there's any part of you that wants to try this tubeless thing you've been hearing about, Nylon strips are just the ticket. They're thinner and offer minimal stretch so they stay put and lay nicely inside the rim to provide a secure seal. Plus, they're lighter which we all know means you'll go faster… maybe.

$30.00
Surly Thru-Axles are low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Offered in several sizes, for both front and rear wheels.
12x142 Rear Thru Axle:
- Fits: Midnight Special and MDS Dropout bikes including Instigator, Legacy Karate Monkey & Legacy Krampus.
12x142/148 Rear Thru Axle:
- Designed for frames with Surly Gnot Boost spacing (145mm), capable of working with 142 or 148mm rear hubs
- Fits: Karate Monkey, Krampus, Troll, Ogre, ECR
12x177 Rear Thru Axle:
- Fits: Wednesday
12x197 Rear Thru Axle:
- Fits: Ice Cream Truck, Big Fat Dummy
12x100 Front Thru Axle:
- Fits: Midnight Special
15x110 Front Thru Axle:
- Fits: Karate Monkey, Krampus
15x150 Front Thru Axle:
- Fits: Wednesday, Ice Cream Truck, Big Fat Dummy

$100.00
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25-inch to 2.5-inch tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5-inch Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims.
- The perfect balance of strength and weight
- 24% wider than the Arch EX for improved stability with larger tires
- Same light weight as the Arch EX
- Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats
- 25% stiffer and stronger for improved handling
- Lighter and more durable rim shape and alloy
- Most trusted tubeless system for easy setup and low maintenance
- WideRight optimized for Trail tires

$475.00
- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits
- Tie beam triple-cavity rim design resists damage and prevents air loss under impacts
- 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires
- E-sync hubs
Specs:
- Wheel Tire Type: Tubeless Ready
- Wheel-Brake Comp.: Disc IS 6-bolt
- Rim Material: Aluminum
- Spoke Type: Sapim D-Light
- Valve: Presta
- Rim Construction: Double wall

$309.00 - $455.00
The new Flow MK3 is wider, stronger, and lighter. The Flow’s legendary history on the World Cup DH circuit, combined with WideRight 29mm internal width offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Combined with a new shape, the Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing. Laterally stiffer and more durable, the new alloy is also even lighter, putting the new Flow MK3 in a class by itself for all-mountain performance.
Flow MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release.
- 29mm internal width for tires up to 2.8-inches
- Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats
- Even lighter than the Flow EX
- Laterally stiffer and stronger for improved handling
- 25% stiffer and stronger for improved handling
- More durable rim shape and alloy
- Neo hubs accelerate quicker and last longer
- Built on the proven success of the Flow EX on the World Cup DH circuit
- Most trusted tubeless system for easy setup and low maintenance
- Sapim Secure Lock aluminum nipples

$11.25 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3

$18.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant.
Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads:
- MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
- ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this Schrader valve.

$114.99
The Spank 359 Rim is a radially compliant gravity rim featuring our Oohbah Inverted Inner Wall and BeadBite anti-burp technology. Optimized for DH, FR, and heavy enduro use.
- Moderately low 19mm profile height and wide width balances the benefits of radial compliance with high lateral stiffness and predictable handling.
- Radial Compliance improves traction over bumps and chatter while reducing negative feedback to the rider. Performance and comfort are improved.
- 5mm inner width is extremely versatile, fitting tires from 2.0" to 2.6", and even allowing + size tire use without negative squaring off of tire profiles.
- Bead Bite tubeless hooks enhance tubeless performance and tire security, even at lower pressures.

$114.99
The Spank 359 Rim is a radially compliant gravity rim featuring our Oohbah Inverted Inner Wall and BeadBite anti-burp technology. Optimized for DH, FR, and heavy enduro use.
- Moderately low 19mm profile height and wide width balances the benefits of radial compliance with high lateral stiffness and predictable handling.
- Radial Compliance improves traction over bumps and chatter while reducing negative feedback to the rider. Performance and comfort are improved.
- 5mm inner width is extremely versatile, fitting tires from 2.0" to 2.6", and even allowing + size tire use without negative squaring off of tire profiles.
- Bead Bite tubeless hooks enhance tubeless performance and tire security, even at lower pressures.

$129.99
- Weight-optimized, gravity-inspired front hub
- 32mm-diameter oversized bearings allow adaptability up to 20mm thru axles
- Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes
- Compatible with 32 HEX front hub adapters only
- Advanced seal system improves prevention of bearing contamination

$249.99
- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup
- 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click
- Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel
- Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes
- Advanced seal system improves prevention of bearing/drive system contamination

$114.99
Wheels are the first point of contact between you and your bike, and the trail you’re riding on. And while wheel sizes and standards continue to develop significantly year on year, often to both the rider and the industry’s dismay, very little innovation has been seen in the compliancy and responsiveness of the wheel as this first, most important contact and conductor. What Spank has seen in recent years is that bike suspension is continuously evolving and adapting to compensate for stiffer frames and more rigid, deeper profile carbon fiber rims. This overall stiffer rig is being softened, or counter-acted by both bike suspension, and tire design — not to mention the ever lower and lower tire pressures riders are running. Rider position (wider, lower, more forward) is also being impacted directly by the bike frame and cockpit geometries which is constantly aiming for a better riding feel. So surely it is overdue time to re-examine how the engineering of the wheel can become an active contributor to the efficiency of the overall set up. Spank Industries has done just this.
- Low sectional profile height and wide width, adds radial compliance, while keeping high lateral stiffness.
- 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles.
- Ideal for Trail/AM/Enduro bikes looking for a wide profile, without the weight penalty

$114.99
Wheels are the first point of contact between you and your bike, and the trail you’re riding on. And while wheel sizes and standards continue to develop significantly year on year, often to both the rider and the industry’s dismay, very little innovation has been seen in the compliancy and responsiveness of the wheel as this first, most important contact and conductor. What Spank has seen in recent years is that bike suspension is continuously evolving and adapting to compensate for stiffer frames and more rigid, deeper profile carbon fiber rims. This overall stiffer rig is being softened, or counter-acted by both bike suspension, and tire design — not to mention the ever lower and lower tire pressures riders are running. Rider position (wider, lower, more forward) is also being impacted directly by the bike frame and cockpit geometries which is constantly aiming for a better riding feel. So surely it is overdue time to re-examine how the engineering of the wheel can become an active contributor to the efficiency of the overall set up. Spank Industries has done just this.
- Low sectional profile height and wide width, adds radial compliance, while keeping high lateral stiffness.
- 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles.
- Ideal for Trail/AM/Enduro bikes looking for a wide profile, without the weight penalty

$2,500.00
Where in the world can you ride these brutes? Anywhere you damn well please. Road light, off-road tough, smooth as butter, Terra CLX EVO wheels bring leading-edge performance to the diverse needs of aggressive gravel rides. Available in 700c and 650B with 30mm internal-width rims to deliver optimal handling with up to 2.1-inch tires, so you’re the master of any terrain. Durability delivered through unsurpassed toughness-to-weight, thanks to leading composite technology rims. Lifetime warranty and no-fault crash replacement.
- Rim Type: Carbon Clincher, tubeless-first
- Rim Material: Advanced Carbon Composite
- Rim Width (internal): 30mm
- Rim Depth: 25.3mm
- Front Spoke Pattern: Radial/Two-cross (2:1)
- Rear Spoke Pattern: One-cross/Two-cross (2:1)
- Spoke Count: Front/Rear: 24/24
- Spoke Type: DT Swiss Aerolite T-head
- Nipple Type: DT Swiss Pro Lock Alloy hexagonal
- Spoke Length (front): 650B Right/Left: 264mm/260mm
- Spoke Length (rear): 650B Drive-Side/Non-Drive: 259mm/265mm
- Front Hub: Roval AFD1, Center Lock, 12mm thru-axle end cap
- Rear Hub: Roval AFD2, Center Lock, DT Swiss EXP internals, Shimano or SRAM XDR, 142x12mm thru-axle end cap
- Assembly Method: Handbuilt
- Extras: Roval padded wheelbag, Roval tubeless rim tape and valves (pre-installed)

$300.00
Designed to handle everything from backcountry rock gardens to heavy days at the bike park, the Traverse is the definitive all-mountain wheel. A super-light, super-tough alloy rim is combined with refined and ultra-dependable hub and spoke technology for a wheel that can conquer any mountain.
- Rim Type: Traverse Alloy, 29, Disc Brake, Tubeless Ready, Zero Bead Hook Design
- Rim Details: 22mm Depth, 34mm External Width, 30mm Internal Width
- Hub: Roval Step Flange Hub (SP19151/JFM02R) 6-Bolt, DT Swiss Ratchet LN 18t (20 deg), 110x15mm & 148x12mm thru-axle, SRAM XD Freebub, (Convertible freehub and endcaps)
- Bearing Type: Sealed Steel Cartridge Bearing
- Spokes: DT Swiss Competition Race J-Bend, Front: Two-Cross 28 count, L: DS 283mm, R: 283mm; Rear: Two-cross 28 count, L: DS 283mm NDS 283mm
- Nipple: DT Swiss Hex Prolock Brass 2.0x14mm
- Tire Size: 1.95" – 3.0"; Max Pressure: 40 psi
- Weight: Wheelset 1,870g (including tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; to the last nipple turn
- Extras: 19 and 31mm OD end cap options included, Roval tubeless tape and tubeless valve, Spare Spoke and Nipple Kit
- System Weight Limit: 240lbs / 109kg

$48.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option.
Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes.
- Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles.
- Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design.
- Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength.
- Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal.
- Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.

$765.00
The category-defying Trail S wheelset is laced to a 28 hole, 27mm rim offering a lightweight option for all-mountain riding. Utilizing conventional J bend Sapim steel spokes with a 3 cross interface, Trail S is eager to push the pace on the climb while leaving you grinning ear to ear on the descent.
Please note, when stock is available 1/1 Trail wheels are in Boost or Super Boost hubs only. Along with 6 Bolt or Center Lock when available.
Page 1 of 27
Next page