Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Stems
$36.99
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp.
- 2-D forged AL-6061-T6
- Four-bolt handlebar clamp
- 41mm height
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
- Weight: 130g-180g
$49.99
RaceFace's Chester 35 Stem is a practical stem with 2 length options and that legendary bomb-proof Race Face toughness baked right in.
- Forged and machined from 6061 aluminum
- Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body
- Stack Height: 42mm
$99.99
The RaceFace Atlas is designed to bridge the needs of AM and FR/DH riders: light enough for AM, tough enough for FR and DH, providing the ultimate in versatility.
- Four bolt bar clamp holds bar securely in position
- Interlocking U-Shaped Handlebar Clamp Geometry
- Faceplate eliminates stress risers which cause your bar to bend or break
- Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube
- Stack Height: 40mm
$40.00
Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like.
- Stack height: 75mm
- Not recommended for use with carbon steerer tubes
$59.99 - $69.99
- Strong yet competitively lightweight alloy single crown stem for all disciplines
- Unique style, modern geometry, and rock-solid construction, without the heavy price tag
- Dial your fit with micro-increment size options, tuned to fit any rider size and style
- Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep
- Ultra-short stack height and true zero-degree rise
- Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars
- Recommended for: ASTM 5, All mountain, enduro, trail, free ride, DJ, E-Bike
$80.00
Velo Orange Removable Faceplate Quill Stem. For any classic roadie, tourer, mtb, or any other bike with a 1-inch threaded steerer. These stems feature a simple 2-bolt removable faceplate for use with any handlebars including modern bars with 31.8mm clamp diameters. The 90 degree extension gives a bit of rise without looking out of place on a custom build.
- Height above insert: 130mm
- Use shims for 25.4 handlebars (sold separately)
$60.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering methods, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems.
- Class-leading stiffness-to-weight ratio
- More options for a better fit
- New faceplate and geometry for greater stiffness and easier installation
- Distinctive silver finish
$66.00
Whether you’re trying to hold your line on a jackhammer descent or stick a landing on a 20-foot gap jump, you need confidence and control. The heart of the beefy HOLZFELLER Stem is its 6066 aluminum body, 3D forged into a thing of beauty with all-new graphics. It takes design cues from the lighter AKA Stem, but has added strength for the most extreme DH and Freeride situations. The HOLZFELLER features a 2-bolt steerer clamp and 4-bolt handlebar clamp and weighs less than 200g (190g for a 40mm length). It’s available in two color choices and three lengths: 40mm, 55mm or 60mm. HOLZFELLER Stem is also available with a larger 1.5-inch steerer tube diameter.
$120.95
- CNC machined 2014 aluminum body and 7075 aluminum clamps
- 240 degree wrap-around, twin plate clamping system
- External webbing to maximize structural strength
- 118-158g including stainless steel bolts
$59.99
Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.
$45.00 - $48.00
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components.
- Bead-blasted, then anodized, finish
- 3D-forged for increased strength, then CNC-machined
- 4-bolt faceplate design for easy installation
$81.00
The Atmos 7k stem is a lightweight performance stem designed for trail and cross-country use and is the lightest stem in the Atmos range. Featuring a rise or drop of 6° depending on your preference, all fasteners are adjustable via a T25 tool for easy, quick adjustments. The Atmos 7k also features an integrated GoPro mount.
- ±6° angle
- Integrated GoPro mount
- T25 fasteners for 1 tool across the cockpit
SPECIFICATIONS
- Stem Angle/Rise: 6 degrees
- Clamp diameter: 31.8mm
- Steerer clamp diameter: 1-1/8 in
- Hardware: Steel
$43.00
TruVativ's Hussefelt is an aggressive DH/freeride stem forged from 6061 aluminum for superb stiffness and superior strength. The short length provides supreme confidence when railing down the sketchiest steeps. Four bolts attach the faceplate for a vise-like grip on your bars, and the 2-bolt clamp secures to your steerer for pinpoint steering precision and stiffness.
$99.99
- Highly weight optimized single crown stem for use with 35mm handlebars
- Dial your fit with micro increment size options, tuned to fit any rider size and style
- Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep
- Ultra-short stack height and true zero-degree rise
- Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars
- Recommended for: ASTM 5, All mountain, enduro, trail, free ride, E-Bike
Specs:
- Key Technologies: MGR Alloy, chamfered bar clamp, top-cap included
- Material: 6-Series Alloy, 3D forged CNC optimized body
- Rise (°): 0
- Diameter: 35mm
- Stack height: 34mm
- Weight: ±131g (35mm) / ±136g (40mm) ±139g (45mm) ±141g (50mm)
- Finish: Shotpeen anodized
$40.00
Velo Orange Happy Stem. A polished threadless stem with a 45 degree angle to keep your back and wallet happy.
- At least 37mm of steerer is required
- Does not require a stem cap. Longer compression bolt included
- Not compatible with carbon steerer tubes
$54.99
- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight
- Four bolt bar clamp holds bar securely in position
- Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts
- Faceplate eliminates ‘stress risers'
$70.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars—not that you’re worried about that kind of thing. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction.
- Colors: Black
- Material: Al-7075
- Lengths: 40mm, 50mm, 60mm
- Bolts: Steel
- CNC machined for weight reduction
- Four bolt handlebar clamp
- Two bolt steerer clamp
$140.45
Renthal's revolutionary Integra 35 stem combines high strength with ultra-low weight. The use of two independent, C-shape handlebar clamps allows the stem body material to be reduced to a minimum, while maintaining an incredibly stiff and strong structure.
The ultra-wide, 64mm handlebar clamping area increases torsional rigidity and the use of just six bolts vastly reduces overall weight. In addition, the uninterrupted clamp on the underside of the handlebar eliminates stress risers found on most other clamps, which can lead to handlebar failure.
$102.00 - $107.00
Chromag's HiFi stem is light and extremely strong for the ultimate control and performance. The HiFi features a blended shape thanks to 3D forging. Chromag contours every surface for human contact and structural optimization. - 3D forging - 200 grams - Low stack height
$114.45
- High strength and ultra-low weight combined with a low 40mm stack height make for a great all around stem
- Stem is horizontally divided and machined in two pieces, enabling weight to be reduced to the absolute minimum without compromising strength
$135.00
Designed as a replacement for the AM stem, the all-new TR stem matches the aesthetic of the Gravity stem but is tailored for downcountry/trail and all mountain use.
KEY FEATURES
- Opposing steerer clamp bolts to give exceptionally rigid steering characteristics
- 2 piece front plate design with a simple “no gap” clamping system
- Optimum machining to give lightest weight without compromising stiffness
- 32, 40 and 50mm lengths Ø31.8mm clamp
- 35, 40 and 50mm lengths Ø35mm clamp
- CNC machined from a solid billet of 2014 T6 aluminium
- Zero rise
- 56mm clamping width
- Stainless steel taper head screws supplied
- To suit Ø31.8mm and Ø35mm bars
- Available in: black, silver, red, blue, purple, orange and new bronze
- Weights 32mm reach, Ø31.8mm – 123g // 40mm reach, Ø31.8mm – 131g // 50mm reach, Ø31.8mm – 150g // 35mm reach, Ø35mm – 121g
$99.99
- Highly weight-optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars
- Human Factor Design features micro increment size options, tuned to fit any rider size and style
- Human Factor cockpit setup index facilitates tuning of upsweep and backsweep
- Ultra-short stack height and true zero-degree rise
- Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars
- Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness
- Shot peen-anodized surface increases strength, durability, and fatigue life
Features:
- Key Technologies: Human Factor Design, MGR Alloy, Chamfered bar clamp, Custom Top-Cap included
- Material: 6-Series Alloy, 3D forged CNC optimized body, 2D forged faceplate
- Rise (°): 0
- Diameter: 31.8mm
- Stack Height: 34mm
- Weight: ±133g (33mm) / ±138g (38mm) ±140g (43mm) ±143g (48mm)
- Finish: Shotpeen anodized
$30.00 - $36.99
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
$35.00 - $36.99
MSW 17° stems raise the bar—literally—for what riders can expect from an inexpensive stem. Rigorously tested to ISO-4210 Mountain qualification standards.
- Tested to ISO 4210 Mountain standards
- 3D-forged for increased strength, then CNC-machined
- 4-bolt faceplate for easy installation
$229.99
eeSilk Stem is a fatigue-reducing compliance stem that noticeably reduces vibrations on variable surfaces. With up to 20mm of tunable compliance, an easy single bolt external elastomer change and a soft/firm compliance switch – the eeSilk Stem makes any road, no matter the terrain, smoother.
- Weight: 225g - 235g
- Angle: -6° (only)
- Stack Height: 49mm
- Stem Clamp: 31.8mm
$96.00
TruVativ's feathery Stylo T40 Stem is 3D forged from 7050 aluminum for that perfect balance of light weight, stiffness and precision steering control on the trail. Six titanium bolts secure this stem to your fork and bars and keep the weight down, too. Plus, with four different lengths and two color options, you're sure to find the perfect stem with which to crown your ride.
$81.00
It’s low-slung, stiff, aggressive and serves up support and control the way a direct mount stem should. The Descendant direct mount stem may have been designed to attack the race clock, but it was built tough, to take on whatever comes next. No matter where you take it, this Descendant stem will keep you pointed where you want to go.
- Pair with BoXXer fork
- Gives DH riders lower more aggressive position
- Super-stiff, stable front-end handling
- Lightweight
- Two-piece design
$99.95
The new Ritchey WCS Toyon stem takes its lead from the original, award-winning Ritchey C220 stem and gives it a more modern shape and increased stiffness for improved handling and greater responsiveness. The Toyon retains the clamping surface area of the C220, which creates a more secure interface by wrapping a full 220° over the handlebar. Its bolt forces are aligned with the clamp so that the body "embraces" the handlebar—a design which is less prone to damaging lightweight bars and allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. Built from life and all that inspires it, the Toyon builds upon the proven and celebrated C220 design with a fresh, squared aesthetic that adds to the overall harmony of modern frame designs—matching its good looks with enhanced confidence and a more lively feel for wherever your rides take you.
- Matching top cap included
- 6° of positive or negative rise
- 1-1/8" steerer diameter
- Stem body wraps 220° around bar clamping area, holding it in place for easy installation
- Material: 2014 alloy
- Bolts: stainless steel black
- Matching top cap included
- Angle: 84°/6°
- Bar clamp diameter: 31.8mm
- Bar clamp width: 44mm
- Steerer diameter: 1-1/8" (28.6mm)
- Steerer height: 42mm
- Weight: 140g (100mm)
$125.00
A 3D-forged, then precision-machined, lightweight, aluminum mountain bike stem in both 31.8mm and 35.0mm models rated for cross country, trail, all-mountain, enduro, and gravity applications.
- Blind bolt holes and shaping
- Cold-forged and precision-machined
- No-gap face plate and clamp area
- Stainless hardware
$280.00 - $300.00
A 35mm clamp diameter, gravity-rated, carbon-bodied mountain stem built for aggressive riding and the muscular look of today’s carbon Enduro and All-Mountain bikes. The M7 stem is designed to complement the look and ride feel of ENVE M7 handlebars.
- Material: Carbon
- Faceplate material: Aluminum
- Hardware material: Titanium
- Clamp Diameter: 35mm
- Steerer Clamp Diameter: 1-1/8-inch
- Torque Spec: 5.5Nm
- Weight: 85g (35mm), 92g (50mm), 99g (65mm)
Page 1 of 3
Next page